Difference between revisions of "Chapter 6 - Quality Management of Electronic Data"
Jump to navigation
Jump to search
(→6.1 Design Model Quality Control: Updated information on when and where the RID Review Checklist should be submitted) |
|||
Line 2: | Line 2: | ||
==[[#6.1 Design Model Quality Control|6.1 Design Model Quality Control]]== | ==[[#6.1 Design Model Quality Control|6.1 Design Model Quality Control]]== | ||
− | + | Designers and Project Managers are responsible for using the [http://mdotjboss.state.mi.us/SpecProv/getDocumentById.htm?docGuid=71536ffa-6a51-4e45-b38b-da310526378b&fileName=%22RID%20Review%20Checklist.xlsm%22 RID Review Checklist.xlsm] as a tool during the development of the design. A copy of the [http://mdotjboss.state.mi.us/SpecProv/getDocumentById.htm?docGuid=71536ffa-6a51-4e45-b38b-da310526378b&fileName=%22RID%20Review%20Checklist.xlsm%22 RID Review Checklist.xlsm] should be submitted by the Project Manager into the <i>Supporting Documents>RID Preparation</i> folder in accordance with the RID Process outlined in [[Chapter_5_-_RID_Process#RID_Review_Checklist|Chapter 5]]. Designers and Project Managers should also check for spikes, gaps, content, and constructability, which will also be considered during the RID Review process. | |
{{top}} | {{top}} | ||
Revision as of 16:49, 30 May 2018
By Chapter
6.1 Design Model Quality Control
Designers and Project Managers are responsible for using the RID Review Checklist.xlsm as a tool during the development of the design. A copy of the RID Review Checklist.xlsm should be submitted by the Project Manager into the Supporting Documents>RID Preparation folder in accordance with the RID Process outlined in Chapter 5. Designers and Project Managers should also check for spikes, gaps, content, and constructability, which will also be considered during the RID Review process.
6.2 Design Quality Assurance and Model Review
Each model will be checked for spikes, gaps, content, and constructability. A review checklist is available at the following link: RID Review Checklist.xlsm
6.3 Accuracy
-Reserved-
6.3.1 Design Tolerances
-Reserved-
6.3.2 Design Ride Quality
-Reserved-
6.3.3 Drafting Tolerances
-Reserved-