Chapter 6 - Quality Management of Electronic Data

Design Submittal Requirements

By Chapter

Chapter 1 - ProjectWise_Pre-Bid_Processes

Chapter 2 - Data Requirements

Chapter 3 - Standard_Naming_Conventions

Chapter 4 - Developing Electronic Data

Chapter 5 - RID Process

Chapter 6 - Quality Management of Electronic Data

Chapter 7 - Plan and Proposal Preparation

Support Services

<< Previous

Next >>

6.1 Design Model Quality Control

The Designers and Project Managers are responsible for using the RID Review Checklist.xlsm as a tool during the development of the design. A copy of the RID Review Checklist.xlsm should be submitted by the Project Manager into the respective RID folder at the milestones identified in Section 4.1. The Designers and Project Managers should also check for spikes, gaps, content, and constructability.

[top of page]

---

6.2 Design Quality Assurance and Model Review

Each model will be checked for spikes, gaps, content, and constructability. A review checklist is available at the following link: RID Review Checklist.xlsm

[top of page]

---

6.3 Accuracy

-Reserved-

[top of page]

---

6.3.1 Design Tolerances

-Reserved-

[top of page]

---

6.3.2 Design Ride Quality

-Reserved-

[top of page]

---

6.3.3 Drafting Tolerances

-Reserved-

[top of page]

---