Chapter 6 - Quality Management of Electronic Data

Design Submittal Requirements

By Chapter

Chapter 1 - ProjectWise_Pre-Bid_Processes

Chapter 2 - Data Requirements

Chapter 3 - Standard_Naming_Conventions

Chapter 4 - Developing Electronic Data

Chapter 5 - RID Process

Chapter 6 - Quality Management of Electronic Data

Chapter 7 - Plan and Proposal Preparation

Support Services

<< Previous

Next >>

6.1 Design Model Quality Control

Designers and Project Managers are responsible for using the Joint RID Review Checklist and Index.xlsm as a tool during the development of the design. A copy of the Joint RID Review Checklist and Index.xlsm should be submitted by the Project Manager into the Supporting Documents>RID Preparation folder in accordance with the RID Process outlined in Chapter 5. Designers and Project Managers should also check for spikes, gaps, content, constructability, and conformity to the Plan Set submittal, which will also be considered during the RID Review process.

[top of page]

---

6.2 Design Quality Assurance and Model Review

Each model will be checked for spikes, gaps, content, and constructability. A review checklist is available at the following link: RID Review Checklist.xlsm

[top of page]

---

6.3 Accuracy

-Reserved-

[top of page]

---

6.3.1 Design Tolerances

-Reserved-

[top of page]

---

6.3.2 Design Ride Quality

-Reserved-

[top of page]

---

6.3.3 Drafting Tolerances

-Reserved-

[top of page]

---