Template:LearnPath ORDPart3

   OpenRoads Designer Part 3

Course Overview

Part 3 of the OpenRoads Designer learning path is a self-paced Bentley Learn course that is available to all MDOT CADD users.

This self-paced Bentley Learn course expands on the foundational knowledge that was learned in part 1 of the MDOT OpenRoads Designer learning path. For consultant designers with access to Bentley Learn, this learning path is very similar to the 01 – OpenRoads Designer – Roadway Design & Modeling – Intermediate learning path available to all Bentley Learn subscribers. Topics covered include:

1. Intersection Design – Horizontal and Vertical Geometry
2. Intersection Design – 3D Model Detailing
3. Defining Template Components and Constraints
4. Defining Template End Conditions
5. Template Triggers and Switches

Course Pre-Requisites: This course assumes a working knowledge of basic Microstation and OpenRoads Designer functions. Users should review and complete the following courses prior to taking this course:

1. Microstation Connect Edition Part 1 (Available to MDOT Employees via Bentley Learn)
2. OpenRoads Designer Part 1 (Available to MDOT Employees via Bentley Learn)

Estimated Time to Complete: 10 Hours