Difference between revisions of "824 - Construction Surveying and Staking"

From MediaWiki
Jump to navigation Jump to search
m (Removed 2012 Spec Book tagline link)
Line 6: Line 6:
  
  
−
==[[#GENERAL|GENERAL]]==
+
<center><span STYLE="font: 60pt arial;">'''CONSTRUCTION MANUAL CONTENT TEMPLATE - WIKI CODE'''</span></center>
  
 
<span style="color: red"> -Reserved- </span>
 
<span style="color: red"> -Reserved- </span>
Line 12: Line 12:
 
{{top}}
 
{{top}}
  
−
==[[#MATERIALS|MATERIALS]]==
 
  
 +
==[[#GENERAL DESCRIPTION|'''GENERAL DESCRIPTION''']]==
 
<span style="color: red"> -Reserved- </span>
 
<span style="color: red"> -Reserved- </span>
  
 
{{top}}
 
{{top}}
 +
===[[Definitions and Terms|Definitions and Terms]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#General Overview|General Overview]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Contractor Prequalification|Contractor Prequalification]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Code of Federal Regulation (CFR) / FHWA Regulations|Code of Federal Regulation (CFR) / FHWA Regulations]]=== 
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
==[[#MATERIALS|'''MATERIALS''']]==
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Description of Materials Used|Description of Materials Used]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Pictures of Materials|Pictures of Materials]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
==[[#EQUIPMENT|'''EQUIPMENT''']]==
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Description of Equipment Used|Description of Equipment Used]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Equipment Specifications|Equipment Specifications]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Pictures of Equipment|Pictures of Equipment]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
==[[#PRECONSTRUCTION|'''PRECONSTRUCTION''']]==
 +
 +
===[[#Submittals|Submittals]]===
 +
 +
Contractor Responsibilities
 +
If the contractor staking pay item is included in the project then the Contractor is responsible for work as defined in 824.03B - 824.03W.
 +
Contractor Staking Quality Control (CSQC)
 +
 +
====[[#Contractor Staking Quality Control Plan|Contractor Staking Quality Control Plan]]====
 +
The contractor quality control plan is an important communication tool that identifies key contacts, quality control procedures, documentation methods, equipment certification, staking tolerances, and field equipment check procedures.
 +
 +
[https://mdotwiki.state.mi.us/images_construction/9/91/CONTRACTOR_STAKING_QC_PLA1.docx CONTRACTOR STAKING QUALITY CONTROL PLAN]
 +
 +
[https://mdotwiki.state.mi.us/images_construction/8/85/CONTRACTOR_STAKING_QC_PLAN.docx CONTRACTOR STAKING QUALITY CONTROL PLAN]
 +
 +
 +
 +
*Quality Control Staff
 +
**The licensed professional surveyor named in the quality control plan should be the individual responsible for providing professional oversight of the staking activities. This person does not need to serve as the plan manager or site contact, but may do so if appropriate.
 +
 +
*Equipment Calibration
 +
**Copies of equipment certification for levels, transits, lasers, and total stations should be provided to the Engineer. Equipment should be calibrated at a minimum on an annual basis and as needed throughout the project. Field checks should be performed and documented.
 +
 +
*Certification. Provide equipment calibration certification documentation for levels, transits, lasers, and total stations. Calibration certifications must be completed by a third-party verifying that equipment meets the accuracy requirements as specified by the manufacturer.
 +
 
 +
 +
b. Onsite field equipment checks. Check and test equipment prior to use and per manufacturer’s specifications. Perform additional checks if equipment accuracy becomes questionable due to impacts, environmental conditions, or observed inconsistencies.
 +
a. Method of Field Verification. Perform field checks in accordance with the Design Survey Manual and the Survey Standards of Practice procedures and manufacturer-recommended methods applicable for the equipment used. Document all verification activities, including the method, readings, and adjustments made during the project and provide to the Engineer.
 +
b. Documentation. Submit field verification records to the Engineer. Records must include:
 +
1. Date of field verification
 +
2. Equipment type, model, and serial number
 +
3. Verification method used
 +
4. Recorded readings and any adjustments
 +
5. Confirmation of compliance with tolerance limits
 +
 +
c. Non-Compliant Equipment. Remove equipment immediately from service if it is found to be out of tolerance during checks. Recalibrate and recertify the equipment before returning to service. Notify the Engineer and provide recalibration and recertification documentation.
 +
 +
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Permits|Permits]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Qualified Products List (QPL)|Qualified Products List (QPL)]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Plant Inspections|Plant Inspections]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
===[[#Contractor Submitted Plans/Procedures|Contractor Submitted Plans/Procedures]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
==[[#CONSTRUCTION|'''CONSTRUCTION''']]==
 +
 +
===[[#Construction Requirements/Procedures/Installation Methods|Construction Requirements/Procedures/Installation Methods]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Safety|Safety]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Productivity information/charts|Productivity information/charts]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Items of Note|Items of Note]]===
 +
<span style="color: red"> -Reserved- </span>
  
−
==[[#CONSTRUCTION|CONSTRUCTION]]==
 
 
{{top}}
 
{{top}}
 +
 +
 +
===[[#Layout / Survey|Layout / Survey]]===
 +
 +
 +
 +
 +
 +
 +
  
 
====[[#Use of Automated Machine Guidance (AMG)|Use of Automated Machine Guidance (AMG)]]====
 
====[[#Use of Automated Machine Guidance (AMG)|Use of Automated Machine Guidance (AMG)]]====
Line 33: Line 165:
 
{{top}}
 
{{top}}
  
−
==[[#MEASUREMENT AND PAYMENT|MEASUREMENT AND PAYMENT]]==
 
  
 +
==[[#INSPECTION & TESTING|'''INSPECTION & TESTING''']]==
 +
 +
===[[#Inspection Procedures|Inspection Procedures]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Special Attention Areas|Special Attention Areas]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#QA/QC Tests|QA/QC Tests]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Lab Testing / Field Testing|Lab Testing / Field Testing]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Rejection/Remedial Actions|Rejection/Remedial Actions=]]===
 
<span style="color: red"> -Reserved- </span>
 
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
==[[#MEASUREMENT, DOCMENTATION & PAYMENT|'''MEASUREMENT, DOCMENTATION & PAYMENT''']]==
 +
 +
===[[#Measurement|Measurement]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Documentation Requirements|Documentation Requirements]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
===[[#Basis of Payment|Basis of Payment]]===
 +
<span style="color: red"> -Reserved- </span>
 +
 +
{{top}}
 +
 +
==[[#LOCAL AGENCY PROJECTS|'''LOCAL AGENCY PROJECTS''']]==
 +
Only if applicable
 +
 +
{{top}}
 +
 +
==[[#RAIL PROJECTS|'''RAIL PROJECTS''']]==
 +
Only if applicable
 +
  
 
{{top}}
 
{{top}}
Line 42: Line 224:
 
[[Category: Division 8]]
 
[[Category: Division 8]]
 
[[Category: Section 824]]
 
[[Category: Section 824]]
 +
[[Category:New CM Format]]
 +
 +
 +
 +
 +
 +
==[[#CONSTRUCTION|CONSTRUCTION]]==
 +
{{top}}
 +
 +
====[[#Use of Automated Machine Guidance (AMG)|Use of Automated Machine Guidance (AMG)]]====
 +
The following information will serve as guidance for the administration of projects that incorporate the Special Provision for Automated Machine Guidance (AMG).  The documentation is specific for AMG projects and supplements information for the Engineer in the special provision for the administration of AMG work.  These procedures apply to all federal and state funded projects that use the AMG process.
 +
 +
[[File:CMU16-001 AMG Attachment Final.pdf|500px|thumbnail|center|Automated Machine Guidance]]
 +
 +
[[File:CMU16-001 AMG Sample Work Plan Final.pdf|500px|thumbnail|center|AMG Sample Work Plan]]
 +
 +
[[File:CMU16-001 AMG Verification Form Final.pdf|500px|thumbnail|center|AMG Verification Form]]
 +
 +
 +
{{top}}

Revision as of 16:56, 19 February 2026

824
Contractor Staking


CONSTRUCTION MANUAL CONTENT TEMPLATE - WIKI CODE

-Reserved-

[top of page]


GENERAL DESCRIPTION

-Reserved-

[top of page]

Definitions and Terms

-Reserved-

[top of page]

General Overview

-Reserved-

[top of page]

Contractor Prequalification

-Reserved-

[top of page]

Code of Federal Regulation (CFR) / FHWA Regulations

-Reserved-

[top of page]

MATERIALS

-Reserved-

[top of page]

Description of Materials Used

-Reserved-

[top of page]

Pictures of Materials

-Reserved-

[top of page]

EQUIPMENT

-Reserved-

[top of page]

Description of Equipment Used

-Reserved-

[top of page]

Equipment Specifications

-Reserved-

[top of page]

Pictures of Equipment

-Reserved-

[top of page]

PRECONSTRUCTION

Submittals

Contractor Responsibilities If the contractor staking pay item is included in the project then the Contractor is responsible for work as defined in 824.03B - 824.03W. Contractor Staking Quality Control (CSQC)

Contractor Staking Quality Control Plan

The contractor quality control plan is an important communication tool that identifies key contacts, quality control procedures, documentation methods, equipment certification, staking tolerances, and field equipment check procedures.

CONTRACTOR STAKING QUALITY CONTROL PLAN

CONTRACTOR STAKING QUALITY CONTROL PLAN


  • Quality Control Staff
    • The licensed professional surveyor named in the quality control plan should be the individual responsible for providing professional oversight of the staking activities. This person does not need to serve as the plan manager or site contact, but may do so if appropriate.
  • Equipment Calibration
    • Copies of equipment certification for levels, transits, lasers, and total stations should be provided to the Engineer. Equipment should be calibrated at a minimum on an annual basis and as needed throughout the project. Field checks should be performed and documented.
  • Certification. Provide equipment calibration certification documentation for levels, transits, lasers, and total stations. Calibration certifications must be completed by a third-party verifying that equipment meets the accuracy requirements as specified by the manufacturer.


b. Onsite field equipment checks. Check and test equipment prior to use and per manufacturer’s specifications. Perform additional checks if equipment accuracy becomes questionable due to impacts, environmental conditions, or observed inconsistencies. a. Method of Field Verification. Perform field checks in accordance with the Design Survey Manual and the Survey Standards of Practice procedures and manufacturer-recommended methods applicable for the equipment used. Document all verification activities, including the method, readings, and adjustments made during the project and provide to the Engineer. b. Documentation. Submit field verification records to the Engineer. Records must include: 1. Date of field verification 2. Equipment type, model, and serial number 3. Verification method used 4. Recorded readings and any adjustments 5. Confirmation of compliance with tolerance limits

c. Non-Compliant Equipment. Remove equipment immediately from service if it is found to be out of tolerance during checks. Recalibrate and recertify the equipment before returning to service. Notify the Engineer and provide recalibration and recertification documentation.


-Reserved-

[top of page]

Permits

-Reserved-

[top of page]

Qualified Products List (QPL)

-Reserved-

[top of page]

Plant Inspections

-Reserved-

[top of page]

Contractor Submitted Plans/Procedures

-Reserved-

[top of page]

CONSTRUCTION

Construction Requirements/Procedures/Installation Methods

-Reserved-

[top of page]

Safety

-Reserved-

[top of page]

Productivity information/charts

-Reserved-

[top of page]

Items of Note

-Reserved-

[top of page]


Layout / Survey

Use of Automated Machine Guidance (AMG)

The following information will serve as guidance for the administration of projects that incorporate the Special Provision for Automated Machine Guidance (AMG). The documentation is specific for AMG projects and supplements information for the Engineer in the special provision for the administration of AMG work. These procedures apply to all federal and state funded projects that use the AMG process.

Automated Machine Guidance
AMG Sample Work Plan
AMG Verification Form


[top of page]


INSPECTION & TESTING

Inspection Procedures

-Reserved-

[top of page]

Special Attention Areas

-Reserved-

[top of page]

QA/QC Tests

-Reserved-

[top of page]

Lab Testing / Field Testing

-Reserved-

[top of page]

Rejection/Remedial Actions=

-Reserved-

[top of page]

MEASUREMENT, DOCMENTATION & PAYMENT

Measurement

-Reserved-

[top of page]

Documentation Requirements

-Reserved-

[top of page]

Basis of Payment

-Reserved-

[top of page]

LOCAL AGENCY PROJECTS

Only if applicable

[top of page]

RAIL PROJECTS

Only if applicable


[top of page]



CONSTRUCTION

[top of page]

Use of Automated Machine Guidance (AMG)

The following information will serve as guidance for the administration of projects that incorporate the Special Provision for Automated Machine Guidance (AMG). The documentation is specific for AMG projects and supplements information for the Engineer in the special provision for the administration of AMG work. These procedures apply to all federal and state funded projects that use the AMG process.

Automated Machine Guidance
AMG Sample Work Plan
AMG Verification Form


[top of page]

Retrieved from "https://mdotwiki.state.mi.us/construction/index.php?title=824_-_Construction_Surveying_and_Staking&oldid=9750"